View Articles by Category
There are no sub categoriesCategory » Plesk
Articles on configuring, trouble shooting and working with Plesk on your Un-managed Windows Server
There were 42 articles found in this category:
How to change your server's hostname in Plesk
Plesk 9.5 Log into your Plesk control panel. Click on Settings on the right hand side. Click on Change Hostname, under General. Where it says "Full hostname" is where you would want to put your servers new hostname, typically it is set up as something like server.domain.com or mail.domain.co ...- How do I change Client Settings in Plesk?
First, browse to your Plesk Control Panel. Open up your browser (either Internet Explorer or Firefox), and browse to https://<ip address>:8443 Once at your Plesk Control Panel Login, simply log in with your admin username and password: Next, Click on “Clients” on the left sid ...
- How do I forward a domain in Plesk?
First browse to your Plesk Control Panel. Open up your browser (either Internet Explorer or Firefox), and browse to https://<ip address>:8443 Once at your Plesk Control Panel Login, simply log in with your admin username and password: Once in Plesk you are going to have to add a client ...
- How do I reboot my dedicated server with Plesk?
First browse to your Plesk Control Panel. Open up your browser (either Internet Explorer or Firefox), and browse to https://<ip address>:8443 Once at your Plesk Control Panel Login, simply log in with your admin username and password: Once logged in, click on the “Server” dro ...
- How do I remove a client in the Plesk control panel?
You can remove one or several clients at the same time. To remove a client (clients): 1. Check the checkboxes in the "Sel" column of the Client list corresponding to the clients you wish to remove. 2. Click on remove selected. The Client Removal page appears. 3. For every client y ...
- How do I login to my dedicated server control panel?
Here is how you can login to your Dedicated Server using the Plesk Control Panel: Type in your browser: https://<ip address>:8443, where <ip address> should be replaced with the IP address of your dedicated server. The username and dedicated server password were sent with the "Welco ...
- How do I change the language Plesk uses?
First, you'll need to purchase the language pack from Parallels, and the Plesk Power Pack from Codero Next, log into Plesk and then click on Languages located under Interface on the Home screen Next, choose the default language when you log into Plesk. If there is a red X next to a language, it ...
- How do I add a domain in Plesk 8.x-9.x?
First browse to your Plesk Control Panel. Open up your browser (either Internet Explorer or Firefox), and browse to https://youripaddress:8443 Once at your Plesk Control Panel Login, simply log in with your admin username and password: Once in Plesk you are going to have to add a client before ...
- Introduction to strace
STRACE(1) STRACE(1) NAME strace - trace system calls and signals SYNOPSIS strace [ -dffhiqrtttTvxx ] [ -acolumn ] [ -eexpr ] ... [ -ofile ] [ -ppid ] ... [ -sstrsize ] [ -uusername ] [ -Evar=val ] ... [ -Evar ] ... [ command [ arg ... ] ] strace -c [ -eexpr ] ... [ -Ooverhead ] [ -Ssortby ] [ ...
- I have a dedicated server with Plesk 8.x. how can I change the hostname of my server from IPAddress.dedicated.abac.net to a domain name which I currently own?
You can change the hostname of your Dedicated Server through your Plesk Control Panel. This will change the hostname of your server within the Plesk environment only. In order to update the hostname that your server's IP address resolves to on a DNS level, you will need to request a PTR DNS Rec ...
- How do I generate an SSL CSR for a Linux or Windows Server
Generating a CSR in Plesk for a Linux or Windows Server. 1. Log into Plesk 2. Click on 'Domains' under the 'Main Menu' section 3. Click on the domain you need to generate a CSR for 4. Click on the 'SSL Certificates' icon under the 'Additional Tools' section 5. Click on 'Add SSL Certificate' 6 ...
- Codero has issued me a new IP address to replace one of my current IP addresses. How do I do this on Plesk?
After installation, Plesk reads all your IP addresses from the network configuration files and can then use these IP addresses for hosting DNS domains and Web sites. When you obtain a new IP address that you would like to use on the server, you should add the address through the control panel, a ...
- I have a dedicated server. How can I install my commercial SSL certificate on my server using Plesk?
Secure Sockets Layer (SSL) is a protocol designed to enable encrypted, authenticated connection across the Internet. SSL is used mostly in communication between web browsers and web servers. URL's that begin with 'https' indicate that an SSL connection will be used. Online shopping sites freque ...
- I have a dedicated server with plesk, how do I create a new email account?
Plesk uses the qmail system. You can create and manage email boxes for individuals within a domain which is already hosted on your Dedicated Server. The Plesk Control panel has the following email management functions: Create, edit or delete e-mail boxes and set individual mailbox quotas. All ...
- How can I view client traffic statistics in the Plesk control panel?
Here is how you can view traffic statistics for a specific dedicated server client in the Plesk Control Panel: Login to your Plesk Control Panel. Use the information provided to you when the server was setup. Click on Clientfrom the navigation bar on the left. Click the Traffic icon avai ...
- How do I create a new client in the Plesk Control Panel?
The first step for hosting a domain name in the Dedicated Server Plesk Control Panel will be to create a particular client account. You should also keep in mind that the client will not be able to create domains unless he or she is granted an IP address. Here is how to create a client and config ...
- How do I manage databases in the Plesk control panel?
The Plesk Control Panel has the ability to create multiple MySQL and PostgreSQL databases as well as multiple users within each database. Also, directly accessible via Plesk, are the links to phpMyAdmin and PhpPGAdmin, the PHP interface applications that abstract mysql or postgresql into a web ...
- How can I set limits on a domain in the Plesk control panel?
For each domain the administrator can limit the domain-specific resource usage and the domain validity period. To edit the domain-level limits: 1. Click the LIMITS button on the Domain administration page. The Domain limits page will appear containing the list of resource limit types. At ...
- Can I change the logo in the Plesk control panel?
You can replace the default Parallels Plesk Panel logo banner in the top frame with your own logo. It will be visible to your customers when they log in to their control panels. You can also make your logo a clickable hyperlink. You should use a GIF, JPEG or PNG format file for your logo, prefe ...
- How do I view total traffic statistics on all domains through the Plesk control panel?
Here is how you can view a detailed report on server resources and hosting features used by a specific domain name hosted in your Plesk Control Panel: Login to your Plesk Control Panel. Use the information provided to you when the server was setup. Click on Domains from the navigation bar on ...
