View Articles by Category

There are no sub categories
Add an article to this category

Category » Pleskrss button

Articles on configuring, trouble shooting and working with Plesk on your Unix/Linux Managed Hosting servers.
(Page 1 of 2)      Prev | 1 | 2 | Next

There were 30 articles found in this category:

  1. questionHow can I view client traffic statistics in the Plesk control panel?
    Here is how you can view traffic statistics for a specific dedicated server client in the Plesk Control Panel: Login to your Plesk Control Panel. Use the information provided to you when the server was setup. Click on Clientfrom the navigation bar on the left. Click the Traffic icon ava ...
  2. questionUpdating server Packages and Daemons on servers with Plesk
    When Plesk is installed, it does not dictate the version of software installed, it simply uses the stable version that is installable from the base repository. This means that packages and daemons such as PHP or modules are not installable from inside the control panel. To update or install ...
  3. questionHow do I change Client Settings in Plesk?
    First, browse to your Plesk Control Panel. Open up your browser (either Internet Explorer or Firefox), and browse to https://:8443 Once at your Plesk Control Panel Login, simply log in with your admin username and password: Next, Click on “Clients” on the left side of the control p ...
  4. questionHow do I change the language Plesk uses?
    First, you'll need to purchase the language pack from Parallels, and the Plesk Power Pack from Codero Next, log into Plesk and then click on Languages located under Interface on the Home screen Next, choose the default language when you log into Plesk. If there is a red X next to a language, it ...
  5. questionHow do I change domain settings in Plesk?
    First browse to your Plesk Control Panel. Open up your browser (either Internet Explorer or Firefox), and browse to https://youripaddress:8443 Once at your Plesk Control Panel Login, simply log in with your admin username and password: Next, Click on “Domains” on the left side of t ...
  6. questionHow do I forward a domain in Plesk?
    First browse to your Plesk Control Panel. Open up your browser (either Internet Explorer or Firefox), and browse to https://:8443 Once at your Plesk Control Panel Login, simply log in with your admin username and password: Once in Plesk you are going to have to add a client before you can ad ...
  7. questionHow do I add a domain in Plesk 8.x-9.x?
    First browse to your Plesk Control Panel. Open up your browser (either Internet Explorer or Firefox), and browse to https://youripaddress:8443 Once at your Plesk Control Panel Login, simply log in with your admin username and password: Once in Plesk you are going to have to add a client before ...
  8. questionHow do I restore a MySQL database?
    Important Notes: This guide will need to be executed from the command line. If you do not know how to connect to your server using command line, you should first read "How do I connect to my Linux server by Command Line? Getting Started: First, you'll need to create a new database on the se ...
  9. questionHow can I view all statistics associated with a domain in the Plesk control panel?
    To choose the statistical program you want (Webalizer or AWStats): On your Home page, click Web Hosting Settings. Select the statistical package you need from the Web statistics menu (AWStats is recommended), and select the accessible via password protected directory /plesk-stat/webstat check ...
  10. questionHow do I remove a client in the Plesk control panel?
    You can remove one or several clients at the same time. To remove a client (clients): 1. Check the checkboxes in the "Sel" column of the Client list corresponding to the clients you wish to remove. 2. Click on remove selected. The Client Removal page appears. 3. For every client y ...
  11. questionHow do I delete a hosting configuration in the Plesk control panel?
    You can change (set up) another hosting type for a domain only after you delete the current hosting configuration. To do this, click on the DELETE button, located at the Hosting section of the Domain administration page. This article has been provided by Codero Hosting, the leading provider of r ...
  12. questionHow can I run a custom php.ini for each domain if I have plesk?
    Often times you'll need to change a few settings in PHP for one domain on your server, but not another. An example would be if you need to enable open_basedir for one of the domains that you host on your dedicated server, while not affecting the other domains. This can safely be done by using ...
  13. questionHow do I shutdown my dedicated server with Plesk?
    When you need to completely shut down the server, you should do it through the Plesk control panel software rather than simply turning off the hardware. Shutting down with Plesk closes all open files and gracefully ends all current services. To shut down your system, follow these steps: 1. Cli ...
  14. questionHow do I login to my dedicated server control panel?
    Here is how you can login to your Dedicated Server using the Plesk Control Panel: Type in your browser: https://:8443, where should be replaced with the IP address of your dedicated server. The username and dedicated server password were sent with the "Welcome" message to your contact email ad ...
  15. questionHow can I set limits on a domain in the Plesk control panel?
    For each domain the administrator can limit the domain-specific resource usage and the domain validity period. To edit the domain-level limits: 1. Click the LIMITS button on the Domain administration page. The Domain limits page will appear containing the list of resource limit types. At ...
  16. questionWhat is the client report in the Plesk control panel?
    Plesk keeps a summary of important data for every client in the system. The client report is a brief overview of the client-related system information. Click the REPORT button to view the client report. The client report includes the following information: Data Meaning Version the versi ...
  17. questionHow do I restart services on my dedicated server with Plesk?
    You can restart some of Plesk services directly from the control panel. The services available for restart are: Qmail Apache web server Named Courier-IMAP Stunnel Tomcat PostgreSQL In order to stop, start, or restart some system service follow these steps: 1. Click on the ...
  18. questionHow do I remove a domain from hosting in the Plesk control panel?
    You can remove one or several domains at the same time. To remove a domain (domains): 1. Check the checkboxes in the Sel column of the Domains list corresponding to the domains you wish to remove. 2. Click remove selected. The Domain Removal page appears. 3. If you are certain tha ...
  19. questionHow do I set the system time and date on my dedicated server with Plesk?
    As the administrator, you are able to manage your server date and time through the interface. From the System Date and Time page, you can review and edit the time and date manually.You can also synchronize your server time with the Network Time Protocol (NTP) server. To set the system time, foll ...
  20. questionDoes Plesk have a file manager?
    Yes. Once you have configured hosting for a domain, you can use a file manager to handle all your files in a more convenient way. To access the file manager functions: Log in to Parallels Plesk Panel. Go to Domains > domain name > File Manager (in the Files group). Create and upload file ...
(Page 1 of 2)      Prev | 1 | 2 | Next

Signup today and get tips sent directly to your inbox!

Close

Codero Hosting does not share your personal information with anyone privacy policy